Product Description
,ViewHD Two Input HDMI to RGB Component YPbPr ,CTEK Multi US 3300 12-Volt Smart Battery Charger ,Battery Tender 022-0165-DL-WH 12-Volt 2-Bank Battery Management , Clore Automotive JNC660 1700 Peak amp 12-Volt Jump Starter,Jump-N-Carry JNC300XL 900 Peak Amp Ultraportable 12-Volt Jump Starter Product Description
This handy Digital To Analog Audio converter box takes your coaxial/optical (S/PDIF or TOSLink) digital audio source and converts it to standard analog left/right audio, for connection to an external device such as an amplifier or recording deck via standard RCA-style jacks. Bridge your legacy sound system with digital sources such as DVD and CD players that don't have RCA-style analog outputs.
Convert your digital audio source to standard analog left/right audio. 
Outputs a standard two-channel RCA signal. 
Optical/Coaxial inputs accepted. Compact Profile In a handsome white plastic chassis, this device is a small 1.65 x 0.87 x 1.59 inches in size, and weighs just 25g. It's a breeze to set up and keep out of the way.
Handles Most Digital Signals
This box converts S/PDIF or TOSLink digital audio signals to analog L/R audio, accepting uncompressed digital audio at 32, 44.1, 48 and 96 KHz sample rates.
How it Works
Simply run a short extension cable from an available digital audio output jack on your digital source device to the same type of digital input on the Converter. Select which kind of digital signal (coaxial or optical) is being input with the selector switch on the converter, then hook up your analog RCA-style left and right cables to the Converter's analog RCA jack outputs and power up all equipment.
**Please note that this product does not support encoded Dolby Digital audio. Verify you can turn off Dolby Digital in the source you will be connecting to this converter.
What's in the Box Gefen Digital Audio To Analog Audio Converter, Power Supply, User's Manual
This review is from: Digital Audio To Analog Audio Converter (Electronics)
New Panasonic TC-L32U22 32-Inch 1080p LCD HDTV, new AppleTV 2. Both ONLY have digital optical out. Klipsch Promedia GMX A-2.1 speaker system ONLY has analog digital in (3mm jack or RCA stereo). Optical cable that came with this converter has tiny plastic caps over pins - must be removed before plugging in. TV audio out optical cable goes to this converter, then RCA stereo (red, white) from converter goes to Klipsch controller input. Now any audio that would normally come out of the TV speakers from any source (sat TV, Apple TV, DVD) now comes out Klipsch speakers, regardless if TV sound is on or off, or if Surround Sound (thru TV menu) is on or off. Also tested: Apple TV 2 optical out to converter then Klipsch in - yep speakers play iTunes Movie, Music, Apple TV2 other content sound. But since the AppleTV2 connects to Panasonic TV via HDMI, and the converted TV optical audio out to speakers will play any sound the TV normally plays, there is no advantage I can see to connecting the speaker/converter combo to the Apple TV. Just connect it to the TV optical out and you are done. One point, has nothing to do with the converter: TV volume control will not change volume of Klipsch speakers, because that can only be controlled, as usual, through the Klipsch green speaker volume control knob. TV remote volume control only effects TV speakers, not the speakers connected externally thru the Optical Audio out. Here is what I cannot explain: this TV spec manual states it is capable of Dolby Digital (5.1 Channel) from its optical digital output out. That does not seem to matter with this converter, or is the Dolby Digital out only sometimes on some channels with certain packages? I don't know. So far so good. I leave the TV speakers on all the time (it's a menu choice, make the choice once it stays that way), but twist the Klipsch speaker controller on whenever I want, like watching a commercial-free movie.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น